Developmental Stages and Events - MCAT Biological and Biochemical Foundations of Living Systems

After fertilization occurs, the zygote undergoes a series of cellular divisions in a process called cleavage. This is followed by the formation of the blastula, a hollow sphere of cells. Gastrulation occurs next, where the embryo is divided into three germ layers: the endoderm, mesoderm, and ectoderm (from inside to outside). Hence, gastrulation is the stage in which this process first occurs. Neurulation and organogenesis occur after gastrulation.

After the third cleavage, the embryo would be composed of 8 cells. If every cleavage step up up to this point was indeterminate, then each cell still has the necessary components to develop into a complete organism. The result would be 8 genetical identical organisms.

Fertilization is the complete fusion of egg and sperm. If the chemically-altered sperm are unable to fertilize an egg, there will be no resulting pregnancy. Oogenesis is the process of ovum production. Spermatogenesis is not correct because the chemical is altering the protein coating after production, as the birth control is taken by the woman.

The series of mitotic divisions that convert a zygote to a multicellular blastocyst is known as cell cleavage. All of the listed answers are possible as a result of cleavage mishaps. Tetraploidy can result from cells that fail to cleave at the end of mitosis. Monozygotic twins are a result of unexpected cleavage events where the zygote splits into two identical halves. Depending on the timing of a cleavage event in a zygote, the split can result in conjoined twins. Mosaicism is a result of improper chromosome segregation during cleavage that can result two distinct karyotypes in a single embryo.

Cortical reaction occurs in fertilization when a sperm enters the cytoplasm of an oocyte. The reaction causes a change in the zona pellucida that prevents polyspermy. Determination refers to the point at which a cell becomes committed to a certain developmental path during embryogenesis, and differentiation refers to the process by which that cell actually becomes a specialized tissue cell. Determination occurs very early during embryogenesis, whereas differentiation occurs later in the developmental process.

Once a committed cell begins to develop specialized functions, it is known as differentiation. Before a cell differentiates, it makes a commitment to a certain cell type, first by specification, which is reversible, and then by determination, which is irreversible. Once a cell is committed to a cell type, it undergoes differentiation to develop specific cell characteristics.

Induction is a process in which cells induce adjacent cells to commit to a certain cell type.

The gastrula is formed during the second week following fertilization. At this stage, a process called gastrulation takes place. During gastrulation, the three primary germ layers are formed: the ectoderm, the mesoderm, and the endoderm.

Prior to gastrulation, the embryo is a blastocyst, and prior to that it is a morula. The morula forms soon after fertilization and is classified by cleavage divisions, increasing the number of cells without increasing the size of the embryo. The blastocyst is characterized by the formation of the inner cell mass and trophoblast; implantation occurs during this stage. After implantation, gastrulation occurs. After the gastrula stage, the embryo begins the process of neurulation (development of the primitive streak and notochord) and becomes a neurula.

Embryonic cleavage is the division of cells without cell growth. Once an ovum is fertilized by a sperm cell, it is called a zygote. The zygote undergoes multiple rapid cell cycles (rounds of mitosis) without significant growth, producing a dense cluster of cells that is the same size as the original zygote. This process is called cleavage.

Embryogenesis is the process by which an embryo forms, and begins with fertilization of an ovum by a sperm cell. Once an ovum is fertilized, it is referred to as a zygote. The zygote undergoes rapid mitotic divisions without any significant cell growth, a process called cleavage. After four cell divisions occur, a ball of sixteen cells is produced, which is called the morula. After the seventh cleavage, a ball of 128 cells called the blastula is produced. The blastula allows the addition of the G1 and G2 phases into the cell cycle, permitting the cells to grow in size before dividing. The blastula develops an inner cell mass and trophoblast, and becomes implanted in the uterine lining. A gastrula is formed when cells migrate to the interior of the blastula and form three germ layers: the endoderm, mesoderm, and ectoderm. A neurula forms after differentiation of the ectoderm forms the primitive central nervous structures.

A blastula is a sphere of cells (blastomeres) surrounding a fluid blastocoele. The blastula stage of embryogenesis begins with the appearance of the blastocoel. The blastocoel is a fluid filled cavity that contains amino acids, proteins, growth factors, and other components neccessary for cellular differentiation. The blastocoel allows blastomeres to move during gastrulation.

A morula is a solid ball of cells within the zona pellucida and is a precursor to the blastula.

Gastrulation is the phase in embryogenesis in which the single-layered blastula is reorganized into a trilaminar structure called the gastrula. These three germ layers are called the endoderm, mesoderm, and ectoderm and give rise to individual organs during organogenesis.

The blastula is implanted into the uterine lining and the morula undergoes rapid cell divisions (cleavage) after fertilization of the zygote.

The correct order of the early development is: cleavage, implantation, gastrulation, neurulation.

Cleavage occurs when zygote undergoes many mitotic divisions without cellular growth, becoming a morula and then a blastula. Only after becoming a blastula will the cells begin to grow in size.

Implantation occurs during the blastula stage when the embryo becomes implanted in the uterine lining.

Gastrulation occurs when the three germ layers (endoderm, mesoderm and ectoderm) arise from the blastula. At this stage, the embryo is considered a gastrula.

Neurulation occurs when the germ layers develop a primitive nervous system, transitioning the embryo from a gastrula to a neurula.

Implantation of the embryo occurs during the blastula stage.

The zygote is initially formed by the process of fertilization in the fallopian tube. As the zygote travels within the tube, it begins to undergo cleavage, developing into a morula and eventually a blastula. By this point, it has entered the uterus and can become implanted in the uterine lining. The blastula then begins to differentiate, developing the three germ layers, and becoming a gastrula via the process of gastrulation.

The primitive streak forms in the blastula stage and establishes symmetry (left-right and cranial-caudal body axes). This spatial differentiation determines the site of gastrulation and initiates formation of the three germ layers. The epiblast (precursor to the ectoderm) invaginates to form the primitive streak. Cells from the primitive streak give rise to the mesoderm and the endoderm. Formation of the primitive streak marks the beginning of gastrulation.

The blastula consists of a hollow sphere of cells (blastomeres) surrounding an inner fluid cavity called the blastocoel. There are two regions of the blastula: the inner cell mass (embryoblast) and the trophoblast. The inner cell mass gives rise to the primitive endoderm and epiblast, serving as the site of the developing embryo. The trophoblast cells form the outer ring of the blastocyst and combine with the maternal endometrium to form the placenta.

The inner cell mass, or embryoblast, gives rise to the cells that become the fetus.

The blastula, or blastocyst, is made up of blastomere cells and a fluid-filled cavity called the blastocoel.

There are two regions of the blastocyst: the inner cell mass and the trophoblast. The inner cell mass gives rise to the primitive endoderm and the epiblast, which later gives rise to the three germ layers during gastrulation. The trophoblast is the layer of cells forming the outer ring of the blastocyst. It secretes factors to make the blastocoel and is kept separate from the inner cell mass. All fetal structures eventually develop from the inner cell mass, while the trophoblast helps maintain the fetal environment and placenta.

Cleavage occurs immediately after fertilization. It is a rapid process that increases cell number without increase cell size. Essentially, cells divide without any G1 or G2 phase of the cell cycle. The result is several very small cells that take up the same volume as the original singular zygote.

Cleavage generates the morula and, later, the blastula during development. At the blastula stage, the cells develop the G1 and G2 phases of the cell cycle and begin more comprehensive development. At this stage, the embryo begins to differentiate the inner cell mass and trophoblast regions.

The correct order is listed below.

1. Fertilization: the joining of an egg and sperm

2. Cleavage: early cell division in an embryo before a specific structure is formed

3. Blastula Formation: the cells of the embyro form a hollow structure filled with fluid

4. Gastrulation: the cells in the embryo migrate to form the three germ layers; the hole with fluid formed during the blastula stage is now filled with cells

After fertilization occurs, the zygote undergoes a series of cellular divisions in a process called cleavage. This is followed by the formation of the blastula, a hollow sphere of cells. Gastrulation occurs next, where the embryo is divided into three germ layers: the endoderm, mesoderm, and ectoderm (from inside to outside). Hence, gastrulation is the stage in which this process first occurs. Neurulation and organogenesis occur after gastrulation.